|
|
Robust wheeled robotic chassis
Jirges, Radek ; Chalupa, Jan (referee) ; Bastl, Michal (advisor)
This thesis deals with the issue of the proposal of mobile wheeled robotic chassis. In the introductory theoretical part gives an overview of the division of mobile chassis inclu-ding representatives of each group. In the begining of the practical part describes se-lection of suitable components for the chassis from drivetrain to controlling electronics. Constructional part of this thesis at first deal with selection of suitable material for each part of chassis and than follows construction of these components including decsription of used constructional solutions for each issue. Result of this thesis is robust wheeled chassis fitted with drivetrain and basic electronics.
|
|
|
3D Printer Control System
Vítek, Radim ; Kopečný, Lukáš (referee) ; Arm, Jakub (advisor)
This thesis describes ways to controll 3D printers. Especially controlling stepper motors with their motion profiles. Furthermore discusses about interpolation algorithms. Attention is also paid to the design of the control board for the 3D printer built on kit Nucleo F411. The last part describes implementation of controll firmware.
|
|
|
Desing and Production of Plastic Adapter to Floor Nozzle
Černý, Martin ; Sliwková, Petra (referee) ; Sedlák, Josef (advisor)
This work deals with the design and manufacture of prototypes of plastic reduction to the floor nozzle. Individual shapes and dimensions of the reduction are designed and constructed in 3D parametric software Autodesk Inventor. Models of reduction are produced using an additive method of Fused Deposition Modeling utilizing a 3D printer uPrint. Work is completed techno-economic evaluation with the subsequent analysis and overall evaluation of the applied technology.
|
|
|
Design and realisation of 3D printer with high resolution of print
Peml, Luboš ; Hadaš, Zdeněk (referee) ; Dušek, Daniel (advisor)
This thesis deals with the design and realisation of the stereolithographic 3D printer using DLP projector. The work describes the selection of suitable components for the printer´s mechanical construction and manufacturing of this construction, the solution of printer´s electronics and creation of the printer´s host software and firmware. Recommendations based on executed experiments for the parameters´ values settings have been given here.
|
|
| |
|
|
Manufacturing of Components Using Rapid Prototyping
Peňáz, Jan ; Sedlák, Josef (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis deals with solution of manufacturing prototype using three technologies. Two of them are additive technologies using principles of Laminated object manufacturing and Fused deposition modelling. The third technology was milling. Model of reversible turbine was used as a base for manufacturing. CAD system SolidWorks was used for the model creation, where output formats were SLDPRT and STL. For error check of STL data software MiniMagics was used. For preparation of 3D printing data softwares SD View and Catalyst EX were used. CAM system SolidCAM was used for creation of machining strategy. Devices used for manufacturing of prototypes were 3D printer Solido SD 300 Pro, 3D printer Stratasys uPrint and 5axis mill Hermle C20U. Print on 3D printer Stratasys uPrint the most advantageous technology for manufacturing one prototype.
|
|
|
Experimental 3D printer for the selective laser sintering of polymers
Kroutil, Tomáš ; Čížek, Petr (referee) ; Paloušek, David (advisor)
The diploma thesis deals with design and realization of experimental 3D printer for selective laser sintering of plastic powders. The output of the work is a device that can create the main process conditions for laser sintering. A diode laser is used in the device, which allows aluminum composite powders to be processed. The printer allows you to heat up the applied layer of powder and set-up space. The research section focuses on similar equipment, process parameters, laser technology and control system. The design section contains solution variants and a description of the chosen solution.
|
|
|
DLP LCD 3D Printer
Brandejs, Petr ; Jaššo, Kamil (referee) ; Bayer, Robert (advisor)
This project deals with DLP 3D printing and designing a 3D printer based on this technology. It consists of a glimpse across different 3D printing technologies, their comparison and reasoning behind chosing a DLP printer. Project then follows with design of individual component based on specific parameters needed for this application and price optimization. It ends with a review of the machine.
|
|
|
Building a 3D Printer
Škop, Martin ; Klepárník, Petr (referee) ; Španěl, Michal (advisor)
The aim of this Bachelor thesis is to analyse available options for 3D printing using FDM technology according to requests of cooperating company, to propose several drafts of electronical and software parts of 3D printers. This also includes their connection, functionality testing and implementation of one chosen draft. The core of this Bachelor thesis was to document the progress in building the 3D printer and also to solve arisen problems. The result of this Bachelor thesis is practical realisation of electronic part of 3D printer including basical tests. Secondary benefit of this Bachelor thesis is to explain the issue of 3D printing with the option of building custom 3D printer from PiBot components.
|
|
|
Design and implementation of 3D printer with network printing support
Špringer, Radek ; Hošek, Jiří (referee) ; Krajsa, Ondřej (advisor)
The goal of this thesis is to design a 3D printer type delta. To describe 3D printing technologies used by this printer, basic printer features and commercially available material used at the print and its comparison. To define all hardware components, which are necessary for construction of the 3D printer type delta. To create a proposal and construct an expansion board to which all hardware components of the printer will be connected. To optimize the print space heating and cooling of the printout. To extend the 3D printer with a Web server, which will ensure the network printing possibility.
|
guest ::
